Dew point analyzer

Dew point analyzer adopts imported capacitive dew point sensor, which has the characteristics of quick response, high sensitivity and good repeatability.Dew point analyzer main features:1.With the function of data auto-storing, the interval of recording time can be set2.freely among the

Products Inquiry

Name * :

Tel * :

Email :

CompanyName :

Message :

Product Details

Dew point analyzer adopts imported capacitive dew point sensor, which has the characteristics of quick response, high sensitivity and good repeatability.
Dew point analyzer main features:
1.With the function of data auto-storing, the interval of recording time can be set
2.freely among the range of 1min~24h and the alarm point can be set freely, too;
3.It can do one-way or two-way communication with the computer;
4.It has a long calibration cycle, 2 years in usual.

Dew point analyzer technical parameters:

Test principle	thin-film capacitor
Display mode	128×64 matrix dot LCD
Test range	basic type: -60 ~ +20℃ standard type: -80 ~ +20℃ expansive type: -100 ~ +20℃
Resolution	0.1℃
Accuracy	≤±1℃(0 ~ -60℃) ≤±2℃(below -60℃)
Response time	-40→-10℃5s(10s) -10→-40℃15s(240s)
Repeatability	≤±1.5℃
Analog output	4-20mA.DC(non-isolated output, loaded resistance lower than 500 Ohm） 0-5V.DC(non-isolated output, loaded resistance higher than 10k Ohm) 1 way programmable alarm output (Dry contact type, maximum load 220VAC/2A)
Communication port	RS232（default）or RS485
Power supply	AC170 ~ 265V 50/60Hz
Working temperature	-10 ~ +50℃
Sampling mode	sample gas pass-in
Sample gas flow	2 ~ 4L/min
Sample gas pressure	0.05MPa≤entrance displayed pressure≤0.35MPa
Background gas	H2, He, inactive gas and hydrocarbon, etc
Appearance Size	155mm×155mm×290mm（H×W×D）
Install Hole Cut	135mm×135mm（H×W）
Serving life	＞4 years(under normal use)
Gas circuit port	NPT 1/8 internal thread
Install mode	frame mount

Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will improve or modify any information on the website from time to time without prior notice.